8cyl DIS

[Shannen Durphey]

Looking at some GM info, looks like a 1993 Eldorado with 4.6l engine
has 4 coil packs.  That's Northstar powerplant, IIRC.
Shannen

Mike Swayze wrote:
> 
> THANKS
> By any  chance do you have a specific model the parts could be snagged
> from(another book I'm probably going to need to buy)
> again thanks
> Mike
> 
> At 03:39 PM 11/10/1999 -0600, you wrote:
> >Since you need 4 coils for V8 DIS I would try 2   4 cly. coil paks. You
> >should be able to use the hall effect sensors, coil pak
> >modules  and wires. The ECM should drive both  coil pak modules with out any
> >trouble. Look for 2.0 L  2.5 L engines for the coil paks and V8 engines for
> >the fuel rails or fab up 2  4 cly. fuel rails with a V8 fuel reg.
> >
> >
> >
> >> -----Original Message-----
> >> From:        mswayze at truswood.com [SMTP:mswayze at truswood.com]
> >> Sent:        Wednesday, November 10, 1999 2:38 PM
> >> To:  gmecm at efi332.eng.ohio-state.edu
> >> Subject:     Re: caddy-olds and the buick v6
> >>
> >> I had never even seen a dis until my brothers buick wouldn't run right.
> >> about the only thing I found on the web was a trainer of sorts.
> >> http://www.atechtraining.com/try.htm
> >>
> >> wish I had more hands on on this stuff.
> >> thanks
> >> Mike
> >> At 01:54 PM 11/10/1999 -0600, you wrote:
> >> >If you find a gm DIS module for a v-8 let me know
> >> >electromotive makes one $$$
> >> >Grumpy
> >> >
> >> >
> >> >At 12:08 PM 11/10/99 -0500, gmecm at efi332.eng.ohio-state.edu wrote:
> >> >>Not knowing exactly what components are used, I am wondering if the v6
> >> >>distributorless ignition, fuelinjection components can be adapted to v8
> >> >>use, and if so what the part numbers are.
> >> >>--Mike
> >> >>
> >> >>
> >> >
> >> >
> >