'7747 bin wanted

[Dave Zug]

6 degrees.

the zz4 used 10 degrees.

> From:          Marc Piccioni <piccioni at cadvision.com>
> To:            "'gmecm at efi332.eng.ohio-state.edu'" <gmecm at efi332.eng.ohio-state.edu>
> Subject:       RE: '7747 bin wanted
> Date:          Tue, 16 Nov 1999 21:51:22 -0700
> Reply-to:      gmecm at efi332.eng.ohio-state.edu

> Well after many more hours than expected, the engines running. Anyone have the base timing spec for an '89 5.7 light duty engine? 
> 
> /Marc
> 
> ----------
> From: 	EFISYSTEMS at aol.com[SMTP:EFISYSTEMS at aol.com]
> Sent: 	October 24, 1999 11:47 PM
> To: 	gmecm at efi332.eng.ohio-state.edu
> Subject: 	Re: '7747 bin wanted
> 
> Hi Marc,
>       I'd be glad to help too....Where are you located???? prolly better to 
> contact me offlist at    InTech at writeme.com    ttyl
> -Carl Summers
> 
> 
> In a message dated 10/24/99 8:52:35 PM Pacific Daylight Time, 
> mpiccioni at attcanada.net writes:
> 
> << Subj:     '7747 bin wanted
>  Date:  10/24/99 8:52:35 PM Pacific Daylight Time
>  From:  mpiccioni at attcanada.net (Marc Piccioni)
>  Sender:    owner-gmecm at esl.eng.ohio-state.edu
>  Reply-to:  gmecm at efi332.eng.ohio-state.edu
>  To:    gmecm at efi332.eng.ohio-state.edu ('gmecm at efi332.eng.ohio-state.edu')
>  
>  Hi group,
>  
>  After monitoring and learning a great deal from this group, I've finally 
>  jumped in with both feet and am 3/4's down swapping a 89' 350 TBI motor 
>  into my '83 Malibu.
>  
>  The engine is light duty variant out of a 1500 series PU, the only complete 
>  wiring harness that I was able to get used locally is out of a '88 HD 3/4 
>  ton G van.  The G van harness is set up with a kickdown relay for a TH 400, 
>  and doesn't have provision for EGR.
>  
>  The Malibu has a L/U TH 350 in it and a 2.91 rear gear.
>  
>  Any suggestion for a bin ? I'd be willing to pay for someone's time to mod 
>  and burn an EPROM (EPROM burner's on the Xmas list......).
>  
>  The engine is bolted in and needs about another 6 hours to finish wiring 
>  the ECM and misc. assembly to complete. I have a LD 350 bin and net res. to 
>  get it fire up initially.
>  
>  /Marc
>   >>
> 
> 
> 
~~~
Dave Z. www.delanet.com/~tgp