GM 2732 won't program

[TK]

I'll trade some 256k's if you like.

Terry
----- Original Message -----
From: the Fredericks <fredericksk at worldnet.att.net>
To: <gmecm at efi332.eng.ohio-state.edu>
Sent: Sunday, October 17, 1999 5:42 PM
Subject: RE: GM 2732 won't program


> I may have some 512s.  Let me check at work tomorrow.
>
> Regards,
> Kendall Frederick
>
> > -----Original Message-----
> > From: owner-gmecm at esl.eng.ohio-state.edu
> > [mailto:owner-gmecm at esl.eng.ohio-state.edu]On Behalf Of TK
> > Sent: Sunday, October 17, 1999 8:27 PM
> > To: gmecm at efi332.eng.ohio-state.edu
> > Subject: Re: GM 2732 won't program
> >
> >
> > I check them out. I'm swimming in 256k's. Need some 512k.
> >
> > TK
> >
> >
> > ----- Original Message -----
> > From: CSH-HQ <nacelp at jvlnet.com>
> > To: <gmecm at efi332.eng.ohio-state.edu>; <gmecm at efi332.eng.ohio-state.edu>
> > Sent: Sunday, October 17, 1999 4:47 PM
> > Subject: Re: GM 2732 won't program
> >
> >
> > > I been using Astro Marketing, in Florida, sorry no phone number with
me.
> > > Pulls only.  Were really reasonable. Cheryl, was the sales lady.
> > > For groups of 50 price was $1 per.  If ya need help making a min
order,
> > CSH
> > > always is interested inna few.
> > > Cheers
> > > Grumpy
> > >
> > >
> > > >Well, that explains some of them dying. I can program them, but they
> > doesn't
> > > >like more than a few times.
> > > >
> > > >Anybody have a cheap source for 512K eproms?
> > > >
> > > >Terry
> > > >
> > > >----- Original Message -----
> > > >From: <ECMnut at aol.com>
> > > >To: <gmecm at efi332.eng.ohio-state.edu>
> > > >Sent: Sunday, October 17, 1999 3:30 PM
> > > >Subject: Re: GM 2732 won't program
> > > >
> > > >
> > > >> I'm not going to pretend I knew that..
> > > >> Thanks Ludis, yours are always worth reading.!.
> > > >> Mike V
> > > >> >
> > > >> >  >I found a data sheet for a 27C32B.  It programs at 12.5
> > volts.  The
> > > >data
> > > >> >  >sheet mentions that programming voltages above 14 volts
> > will damage
> > > >the
> > > >> > chip.
> > > >> >  >
> > > >> >  >So - it looks like I blew up this EPROM by trying to
> > program it as
> > a
> > > >> >  >2732 and 2732A.
> > > >> >  >
> > > >> >  >--
> > > >>
> > > >
> > >
> > >
> >
> >
>
>