new to list

[Shannen Durphey]

All ya had ta do was ask! 1992, auto, 2.59 gears.
ftp://efi332.eng.ohio-state.edu/incoming/bdbk4779.bin
Shannen

Carl Summers wrote:
> 
> Hi Ronnie,
>     Didn't mean to sound insultive for not doing it yourself the first
> time...Most of us have been there done that deal with the chip
> "gurus"....Ok,,,who has a copy of the bin file(BDBK) and is it manual or
> auto??????  ttyl
> -Carl Summers
> 
> > In a message dated 10/17/99 8:10:00 AM Pacific Daylight Time,
> > wooster9 at juno.com writes:
> >
> > << Subj:     Re: new to list
> >  Date:  10/17/99 8:10:00 AM Pacific Daylight Time
> >  From:  wooster9 at juno.com (Ronnie Woods)
> >  Sender:    owner-gmecm at esl.eng.ohio-state.edu
> >  Reply-to:  gmecm at efi332.eng.ohio-state.edu
> >  To:    gmecm at efi332.eng.ohio-state.edu
> >
> >  Maybe I was misinformed during the buying part of the chip. But they did
> >  tell me that I could make as many changes as I wanted at no charge. The
> >  last change was a major one though, Vortech Supercharger, which I have
> >  since removed, because my compression is too high to utilize it properly.
> >  I once changed to a 306 Comp Cam and had to take it out because they
> >  could not get it not to run so rich. I was also sending them the O2
> >  sensor readings from my autoxray. Now my autoxray is not working right.
> >  Anyway I did'nt mention their name to give them bad press. I went through
> >  this same thing with JET and thought I could start doing more mods by
> >  using another company. Now I figure it is time to learn to do it myself,
> >  if I can, with the help from this list.
> >  The car idles a little rich and is blowing black smoke at WOT, as
> >  observed at the drag strip. I need to get another scan tool of some sort
> >  to start reading the data again.
> >  The chip is a BDBK
> >
> >  Thanks
> >  Ronnie
> >   >>
> >
> >