305 idle with this cam and chip

[CSH-HQ]

I'm running a .03 over 350, with a comp cams 270 cam, ie 270 adv dur. 224 @ 
.050, 110 centers .470 lift, 1.52 rockers, and 9.5:1.
  Took lots of tinkering to get idle and off idle right. 
  At the time all I had was the TTS Hardware, which ain't that good for 
options, ie AE, IAC.
  Stock chip ain't with in 4 light years, unless maybe using stock injectors
Might consider using 747 if your not
  Aftermarket, never, use that money to buy an edito, burner,eraser,
try first finding som prom holders
Grumpy

>Just curious how would a .030 over 305 idle with this cam and would a
>aftermarket computer chip work with it?  What about stock chip?  I am
>assuming Edelbrock Performer Intake and Holley 670 cfm TBI.  Here is the
>cam:
>
>215/224 duration at .050; .478/.480 lift (not sure if 1.6 or 1.5 rockers)
>and 112/108 LC. It is a Lunati Grind.  Motor would be a close to 10:1 CR 305
>with headers and 3" exhaust.  DDDyno says good power, but I don't believe it
>that much. Thanks.
>
>
>Igor Todorovic, U of C
>1981 Delta 88, 455 4bbl
>1988 Pontiac Trans AM, L03, T5
>WebSite:
>
>http://members.home.net/igor455/olds.htm
>