305 idle with this cam and chip

[CSH-HQ]

Nice try, sneeking back in, but we caught ya.
Grumpy


>>Just curious how would a .030 over 305 idle with this cam and would a
>>aftermarket computer chip work with it?  What about stock chip?  I am
>>assuming Edelbrock Performer Intake and Holley 670 cfm TBI.  Here is the
>>cam:
>>
>>215/224 duration at .050; .478/.480 lift (not sure if 1.6 or 1.5 rockers)
>>and 112/108 LC. It is a Lunati Grind.  Motor would be a close to 10:1 CR 305
>>with headers and 3" exhaust.  DDDyno says good power, but I don't believe it
>>that much. Thanks.
>
>I've got a Compucam 2050, 216/228, .454/.480, and 107/117 LC in my 305.  I
>have to screw down the idle air control on the feedback carb to get it to
>idle pretty smooth at 750 rpm in gear.  I have a stock converter too, a
>little higher stall say 2000 or so would surely help.  It's got plenty of
>pep in the low end for everyday driving I think.  I would retard it 2
>degrees next time since the 305 heads aren't really rpm happy.  Sounds nice
>though.
>
>Ed Hilker aka "Chief"
>84SS GM C3
>