749 in a 749 - troubles

[Ludis Langens]

Jeremy Gonyou wrote:
> 
>      check pins for continuity (using a multimeter and solid core wire to
> get into the bottom end of the memcal)

Put the EPROM in the MEMCAL, and plug the MEMCAL into the ECM.  Now do
your continuity check from the EPROM to the back side of the ECM board
where the header pins come through.

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/