REDLINE ON A 3.4L DOHC (the answer)

[TK]

Very nice!

Terry
----- Original Message ----- 
From: Ludis Langens <ludis at cruzers.com>
To: <gmecm at efi332.eng.ohio-state.edu>
Sent: Monday, September 06, 1999 4:10 AM
Subject: Re: REDLINE ON A 3.4L DOHC (the answer)


> TK wrote:
> > 
> > Anyone know what redline on a 3.4L DOHC is?
> 
> Automatic transmission:
>   Fuel cutout: 6500 rpm  or  120 MPH
>   Fuel cutin: 6250 rpm  and  116 MPH
> 
> Manual transmission:
>   Fuel cutout: 7000 rpm  or  120 MPH
>   Fuel cutin: 6750 rpm  and  116 MPH
> 
> 
> $88D7: time delay till cutout (in iterations @ 80Hz?, @ 10Hz?)
> 
> Cutout data:
> $88E1-$88ED: rpm limit during warmup, indexed by CTS
> $88EE: rpm limit after warmup (as per $00C8)
> $88EF: speed limit (as per $006A)
> 
> Cutin data:
> $88F0-$88FC: rpm limit during warmup, indexed by CTS
> $88FD: rpm limit after warmup (as per $00C8)
> $88FE: speed limit (as per $006A)
> 
> 
> $0046, bit %00010000: rev/speed limited
> $006A: speed in MPH
> $00C8: rpm (0..224..255 == 0..5600..7150rpm)
> 
> -- 
> Ludis Langens                               ludis (at) cruzers (dot) com
> Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/
> 
> 
>