Chomping at the bits

[Programmer]

Yeah--read about the "Bin" thing--now I think I know what I've been
fighting.
Lyndon.
-----Original Message-----
From: Shannen Durphey <shannen at grolen.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: September 6, 1999 3:45 AM
Subject: Re: Chomping at the bits


>I didn't have enough time to modify spark or fuel curves.  I ended up
>wasting a bunch of hours because of faulty .bins,  Probably won't get
>another shot with this one until next year.  My main concern was that
>the base ipw would change with egr on/off, and with no egr installed I
>wanted to remove an extra tuning step.
>Shannen
>
>Programmer wrote:
>>
>> Shannen,
>>
>> How'd you make out with that one ?? I've done it (with an enhanced spark
>> curve) and just ended up
>> with highway "ping" that wouldn't go away <g>... did you have better luck
?
>>
>> Lyndon
>> -----Original Message-----
>> From: Shannen Durphey <shannen at grolen.com>
>> To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
>> Date: August 13, 1999 12:17 AM
>> Subject: Chomping at the bits
>>
>> >I'm working on a 747 bin, trying to disable egr.  Will any problems
>> >result from setting the enable temp bit to 255?  Is that equal to 304
>> >deg F?
>> >
>> >Will setting this bit high effectively disable egr, or are there other
>> >values that should be changed?
>> >
>> >Shannen
>> >
>