Chomping at the bits

[Programmer]

Carl,

I'll have to give the guy a call and get the prom back--need to check it for
a possible error. What
symptoms would this problem that Ludis mentioned give a guy ??

Lyndon IPTECH
-----Original Message-----
From: Carl Summers <intech at writeme.com>
To: 'gmecm at efi332.eng.ohio-state.edu' <gmecm at efi332.eng.ohio-state.edu>
Date: September 6, 1999 1:54 AM
Subject: RE: Chomping at the bits


>Hi,
>      The numbers for the EGR temp enable are actually inverted in the
>7747,,,meaning 0 Hex= 255 in temp and FF hex = 0 in temp.....can screw ya
>up till ya figure it out.....Hex workshop is a great tool, especially when
>you want to cut and paste from one bin to another.  hth's
>-Carl Summers
>
>mailto:intech at writeme.com
>Click on the above link to respond privately.
>
>-----Original Message-----
>From: Programmer [SMTP:nwester at eidnet.org]
>Sent: Sunday, September 05, 1999 10:37 PM
>To: gmecm at efi332.eng.ohio-state.edu
>Subject: Re: Chomping at the bits
>
>Shannen,
>
>How'd you make out with that one ?? I've done it (with an enhanced spark
>curve) and just ended up
>with highway "ping" that wouldn't go away <g>... did you have better luck ?
>
>Lyndon
>-----Original Message-----
>From: Shannen Durphey <shannen at grolen.com>
>To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
>Date: August 13, 1999 12:17 AM
>Subject: Chomping at the bits
>
>
>>I'm working on a 747 bin, trying to disable egr.  Will any problems
>>result from setting the enable temp bit to 255?  Is that equal to 304
>>deg F?
>>
>>Will setting this bit high effectively disable egr, or are there other
>>values that should be changed?
>>
>>Shannen
>>
>