O2 Sensor

[Matt S Bower]

The closer the better and with a heated O2 should make it work ok.  With
the non heated O2 it needed to be pretty close. If you put it at your
first option point there with the heated I believe it will work fine.

Roy Baker wrote:
> 
> Does any one know how far from the exhaust valve the O2 Sensor can be
> placed. Due to restrictions I can place it :
> 1) About  1  pipe meter length from the motor (exhaust valve),
> 2) About 1.8 meters  from the exhaust valve and  after the muffler. This
> will however be  within 200 mm of the open end of the exhaust pipe. Perhaps
> some power boat people  or Hot Rod fans have tried different location? The
> Exhaust pipe is on the outside of the car and the reasons are aesthetics.