Quad-4 (1228707 ECM) Rough Idle Problem

remaklus at attglobal.net remaklus at attglobal.net
Fri Apr 7 00:30:15 GMT 2000


I didn't measure the timing with the EST disconnected, just listened
to engine continue to idle roughly.

Also, the timing on the Quad-4 cannot be adjusted, the computer
controls everything.

Shannen Durphey wrote:

> Hold on....  Tell me again how you checked timing, and what your
> results were?  On the dizzy equipped 4 cyls, GM wants the timing light
> connected to the coil wire so it flashes with every plug firing, and
> the timing is set by the "averaging" method, a service manual way of
> saying "a good guess".  The timing can really fluctuate on some of
> those older engines, and I know that trying to time by #1 alone gives
> bad results.
> Shannen
>
> Will Remaklus wrote:
>
> > I also tried disconnecting the EST output from the ECM such that
> > the ignition module controls the timing: no difference.
> >
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list