TurboLink [was Re: Wastegate Controller]

[Jason R. Haines]

Sorry for the delay in posting an answer to the TurboLink wategate
controller questions - I don't always get a chance to read through all of
the mailing list articles and nobody emailed me directly (that I know of).

The Link products are being carried in this country be Performance
Developments out of Costa Mesa,CA. Phone 949-646-7461, fax 949-646-7471,
email pformdevs at aol.com

The TurboLink isn't cheap - I think it is around $500 plus another $200 for
the tuning controller. It works very well though.

Jason


----- Original Message -----
From: "nacelp" <nacelp at bright.net>
To: <gmecm at diy-efi.org>
Sent: Friday, March 31, 2000 9:16 AM
Subject: Re: Wastegate Controller


> You happen to have any conntact data?.
> Grumpy
>
>
> > I didn't catch the beginning of this thread but we have been doing some
> > testing with a boost controller from a company called Link
ElectroSystems.
> > The wastegate controller is called the TurboLink and it can also be used
> to
> > control auxiliary fuel injectors and perform ignition retard. The boost
> > control is based on rpm, not just a single boost point like some of the
> > other controllers we have tested. I think it also has an rpm switch
> > capability (for a shift light or some other rpm related device) but we
> have
> > not used that feature. The controller is easily programmed by a
removeable
> > tuning module.
> >
> >
> > Regards,
> >
> > Jason
> >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org