manifold machining

[Dave Williams]

-> I would also recommend mounting the bungs as far away from the plenum
-> as possible, meaning right on top of the valves.

 When you find those injectors that can spray through a 90 degree turn
and around a curving path to the valve let me know.  Otherwise, the
injectors are going to spray on the port floor, just like a TPI Chevy or
5.0 Mustang.
                                                                                                          
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org