vortec distributor pn 1104051

[nacelp]

> So does the hall effect sensor pulse 1 per rev?

Once per distributor revolution, or once every other crank revolution.

 If so then it may be possible to determine TDC #1?

Yep.
Grumpy

>
>
>
> ----------
> From: nacelp[SMTP:nacelp at bright.net]
> Sent: April 18, 2000 5:28 AM
> To: gmecm at diy-efi.org
> Subject: Re: vortec distributor pn 1104051
>
> Found it, I was thinking the HVS, system was internally gutless, but yes
> there is a hall effect switch in there.
>   Did any one come up with an absolute answer about the vortec timing
chain
> cover working on older blocks?.
> Grumpy
>
>
>
> > Vortec unit has hall effect? sensor, small shutter.  Only pulses once.
> > Shutter is maybe 20 degrees???
> > Somebody on this list can get a blow by blow of it.
> >
> > 95+ Chevy pickup w/454, pfi
> > 96+ Chevy pickup w/ smallblock sfi
> > Shannen
> >
> > nacelp wrote:
> > >
> > > What exact application is it?.
> > > year, and engine
> > > I think (rather sure), that there is one distirbutor with no guts to
it
> > > other then for spark distribution.
> > > Grumpy
> > >
> > > Subject: vortec distributor pn 1104051
> > > > Does anyone have any specifications on this Vortec distributor?
> > > > Am I correct that it has a cam position sensor built into it and the
> > > vortec uses a crank position sensor to determine TDC ?
> > > > /Marc
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
>
>
>


----------------------------------------------------------------------------
----


>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org