Asynch vs Synch Injection

[nacelp]

Clock?. Reset, maybe.  Never saw a variable rate clock.
Grumpy


> So the crank is essentially the clock (per STAVE's responce).. I see.
>
> well my answer spawned a good answer ;-)  and now I know too.. or I know
> AGAIN and will forget again ;-)  sorry if I cornfused anyone.
>
> ----- Original Message -----
> From: Ken Kelly <kenkelly at lucent.com>
> To: <gmecm at diy-efi.org>
> Sent: Thursday, April 20, 2000 4:10 PM
> Subject: Re: Asynch vs Synch Injection
>
>
> > I don't think this is correct. Using O2 sensor is closed
> > loop, Not using the sensor is Open Loop.
> >
> > I think that Sync vs Asynch would normally be talked about
> > as Batch vs Sequential Injection
> >
> > "Dave Zug." wrote:
> > >
> > > Sync is "clocked"
> > > Async is not clocked.
> > >
> > > If I make a feeble attempt to translate this...
> > >
> > > Sync is USING the o2 as feedback,
> > > Async is NOT using the o2.
> > >
> > > seems right?  I probably shouldn't try to enhance a perfectly good
> answer.
> > >
> > > ----- Original Message -----
> > > From: nacelp <nacelp at bright.net>
> > > To: <gmecm at diy-efi.org>
> > > Sent: Thursday, April 20, 2000 1:12 PM
> > > Subject: Re: Asynch vs Synch Injection
> > >
> > > > Async, is for high fuel demands when you needs lots of fuel, ie
Heavy
> AE,
> > > > WOT.
> > > > Sync is for like idle, and cruise
> > > > Grumpy
> > > >
> > > >
> > > > > Does anyone have a good understanding of the differences/relations
> > > between
> > > > > asynchronous and synchronous Injection.  About all I've figured
out
> so
> > > far
> > > > > is that it's counter-intuitive (in asynch they fire at the same
> time).
> > > > >
> > > > > Thanks
> > > > >
> > > > > Jeremy
> > > > > ______________________________________________________
> > > > > Get Your Private, Free Email at http://www.hotmail.com
> > > > >
> > > >
> > >
>
> --------------------------------------------------------------------------
> > > > --
> > > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > > in the body of a message (not the subject) to
> > > majordomo at lists.diy-efi.org
> > > > >
> > > >
> > >
>
> --------------------------------------------------------------------------
> > > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org