'747 IAC stuff

[rr]

I'd like to, but really can't. My added comments are on the hardcopy
and I'm scanner-less. However, go to the Ecmguy's site and download
the hac for the '747, (get the BUA hac while your there).

The IAC idle stuff and the throttle follower decay starts at 0xF241
and ends at 0xF30F. The follower attack code runs from 0xE138 to
0xE17C. This should get you started in the right direction.

BobR.


Peter Gargano wrote:

> rr wrote:
>
> > I figured some of the IAC stuff out.
> ...
> > Would anyone trying these get back to the list on the results?
>
> Bob,
>
> Is it possible to send me the code fragment of this stuff you've
> worked out - I'd like to locate the (most probably the) same
> code in ASBX for the '808/'165. I know I could get a '747 bin
> and do it myself - but this way I get your meaningful comments
> too!
>
> I noticed on my VN, that if I veeerrry slowly open the throttle,
> and then close it quickly, I almost get a stall. OTOH, a blip
> will cause a lot of IAC chatter, and the revs come down only slowly
> to a normal idle speed.   I'd like to play with this too!
>
> TIA, Peter.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org