Fuel Hoses, Found

[Shannen Durphey]

Looks like you found the stuff.  The hoses push on better if they're
not dry.  The fitting/line connections are not rated for 300 psi with
just any old hose.  Just thought I'd mention that for the bystanders.

They are also sold under another brand, Parker Hannifin(sp?).  I have
some which were procured at an industrial supply place.
Shannen

Bob Valentine wrote:
> 
> Finally found a local shop which stocks the whole Aeroquip line, not just
> the metal-braid race stuff.   Not sure if anyone needs this info , but
> here's pn's for what I used for going from frame-rail steel fuel line to
> the fuel rail.  This is push-on rubber hose, no crimping rings or
> compression fittings needed.  Rated for 300 psi.  Fittings are brass.  Also
> available in -8 and -10.
> 
> Hose, -6, Aeroquip PN 2556-6
> -6 Hose to Male 3/8" inverted flare fitting PN 4740-6
> -6 Hose to Female 3/8" inverted flare fitting PN 4743-6
> 
> This is great stuff, and cheap too - hose $2.50/ft, fittings $3.25 each.
> 
> -> Bob Valentine
> -> bob at tecmark.com
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org