ECM Identification

[Dan Plaskett]

It's not my ECM and memcal but the guy I'm helping does have does have it.
When he sends it to me I'll read the bin file and forward it to you if you'd
like.

Dan Plaskett

----- Original Message -----
From: "Ludis Langens" <ludis at cruzers.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, August 03, 2000 2:45 PM
Subject: Re: ECM Identification


> Dan Plaskett wrote:
> >
> > So my question is can I use this ECM with a 90-91 Y body memcal on a
L-98?
> > Or does the additional SRAM throw a wrench into the works.  Ludis's site
> > shows the same schematic as for the 1227730 so I assume it will work,
but I
> > know what happens when one ass-u-me s anything.
>
> It's worth trying to use it as a '727.  A quick look shows it to be the
> same except for the SRAM.  On the other hand, I haven't compared the
> resistor and capacitor values.  There might be some differences like the
> '7730 vs. '8706 MAF input.
>
> If it doesn't work for you, you should be able to trade the 16149396 for
> a 1227727.
>
> BTW, do you have the AUBU bin?
>
> --
> Ludis Langens                               ludis (at) cruzers (dot) com
> Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org