looking for a bin

[Bruce Plecan]

>Isn't the addt (btw thanks for the melcal) for a distributorless system?

Drat yes

> how much of a difference does the dis vs distributor make ( would the same
mask work?)

the refence angles are different Dissy 0-10, reluctor DIS 60,  hall DIS 70.
Then the advance correction for rpm is different I'd imagine.

>  the reason I want to use a 730 is latter I want to switch to a 16 valve
head and pfi

Just don't see how at the moment
Grumpy

>
> Previously, you (Bruce Plecan) wrote:
> { 730 was used with a 3E mask for a 2.0L,
> { my 87 ADDT (?)
> { reference just no at my finger tips
> { Might try gmemc for a bin.
> { If not there holler later at me off list
> { Grumpy
>

>

> { > Hi All;
> { >  I'm looking for a closest match bin for a swap, I have 1.6L 4cyl, tbi
> { > and distributor, and would like to use a 730 (for future upgrades)
> { > what bin comes closest ( probly a 2.0 or 2.5L )
> { >
> { > thanks
> { >
> { > --
> { > Pat Ford                           email: pford at qnx.com
> { > QNX Software Systems, Ltd.           WWW: http://www.qnx.com
> { > (613) 591-0931      (voice)         mail: 175 Terence Matthews
> { > (613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M
1W8
> { >
>
{ > ------------------------------------------------------------------------
--
> { --
> { > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> { > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> { >
>

>
 ---------------------------------------------------------------------------
-
> { To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> { in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
>

>
> --
> Pat Ford                           email: pford at qnx.com
> QNX Software Systems, Ltd.           WWW: http://www.qnx.com
> (613) 591-0931      (voice)         mail: 175 Terence Matthews
> (613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M 1W8
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org