Ford injectors

JN jwn at sgi.net
Thu Aug 17 14:44:56 GMT 2000


Interesting.  Why the flow rate at 33 as compared to 30?  Is this because
the injectors are rated at 30 pounds/hr at 43.5 psi and at 45 they flow 33?

Thanks for the info.

Jason
----- Original Message -----
From: <timsiford at hushmail.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, August 17, 2000 7:03 AM
Subject: Re: Ford injectors


> I recently installed a set of new Ford SVO 30# injectors on my IROC.  They
> work GREAT.  I purchased them from Summit ... and, yes, 209 is a great
price
> for new 30# injectors.
>
> I am currently running the injectors at 45psi using an injector flow
constant
> of 33lb/hr in the PROM.  The car idles no differently as compared to the
> stock 22lb injectors.
>
> Tim
>
> At Wed, 16 Aug 2000 16:17:53 -0600, Eric Norgard <eric at aztek-eng.com>
wrote:
>
> >
> >I found a set of Ford 30# injectors in the Summit Racing online catalog
> >and
> >was wondering if they are compatible with a GM system. They are
advertised
> >as
> >Ford Motorsports injectors from Ford Racing Performance Parts. I can't
> >tell
> >if it is a Bosch injector or not. Would the Ford injectors fit the GM
> >wiring
> >harness? If they are Bosch injectors, is 209.00 a good price for a set
> >of 8?
> >
> >Thanks
> >Eric
> >
> >--
> >
> >Eric Norgard
> >Software Engineer           Voice: 303-415-6146 (Direct)
> >Aztek Engineering Inc.             303-786-9100 (Receptionist)
> >2477, 55th St., Suite 202   Fax  : 303-786-9190
> >Boulder, CO 80301-2835      Email: Eric.Norgard at aztek-eng.com
> >--------------------------------------------------------------------
> >--------
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list