Fuel filter # found...

[Shannen Durphey]

LOL.  I told ya I'd find it, just not when.

This is the same line I referenced in the updated fuel fittings list,
with a HELP part number.  Local price is around $15 for the 3/8", and
13 for the 5/16".  I'll have to check with NAPA and see what they sell
one for.
Shannen

Bob Valentine wrote:
> 
> This just after I made a GF481 fit....  ;^>
> 
> FYI, Napa #700-2367 is a "Fuel Line Repair Kit" for GM fuel injected
> vehicles.  It's a 12" piece of 3/8 fuel line with a GM 3/8" Saginaw
> (o-ring) fitting at one end and nothing on the other.  A 3/8" compression
> fitting is supplied for the plain end, along with a spring tubing bender.
> Kinda pricy at $10 each, but I couldn't find any clean lines in the salvage
> yard.
> 
> I grabbed two of these, cut them down to about 3" long and put a flare on
> the plain end.  Instant 3/8" inverted flare to Saginaw adapter!
> 
> -> Bob
> 
> At 07:03 PM 8/20/2000 -0400, you wrote:
> >Thanks to Jeff and the Ramjet info, we now have a part no. for an efi
> >rated fuel filter with 3/8" fittings at either end.  It looks like the
> >part number is 25121792, or GF 526.  Jeff, are these right?
> >Shannen
> >----------------------------------------------------------------------------
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
> >
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org