16183247

[David Cooley]

At 02:33 AM 8/22/2000, you wrote:
>Had the car here this morning...interesting memcal. It's about half
>the length of a regular memcal with the ESC board over top. You've
>gotta snip the legs off the ESC to erase the chip. I'll send ya the binary
>tomorrow a.m.

I built a little board that moved the ESC off to the side and had the EPROM 
in a socket.  Fit under the cover in the PCM nicely!
It's on the DIY-EFI incoming directory and it's called memcal.jpg.
I used a wire wrap socket for the Chip, and the pins went thru the board 
into the memcal base.  I ran the 6 wires to the ESC seperately so it was 
off to the side... Worked like a champ!

===========================================================
David Cooley N5XMT Internet: N5XMT at triad.rr.com
Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
I am Pentium of Borg... Division is Futile!
===========================================================

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org