pfi & 747's

[Bruce Plecan]

Very early in the DIY was a guy (Dale Ulan(?)) that posted, the recommended
operating times of the P+Hs is 1-5 Msec, and 2-10 Msec for Sat..
I have yet to be able to disprove anything he wrote.
You can do alot of things, and kludge many things to get a system to work,
but injectors types, and stategies don't seem to be one of them.
Like the ongoing 4 P+Hs in series parr. wiring.  Some guys claim it works
just fine, yet when I run them thata way on the ecmbench you can hear them
starting to lose sync, sound funny.
  You want to run P+Hs in a saturated strategy that seems to work, but
drivers are an issue.
Jus some thoughts
Bruce



> Now this is interesting, 30# injectors are rather large for the
> power these engines make. Seems as though they are making up
> for lack of pw with a larger injector.
> The 17ohms makes them saturated, the slow to open type.
> Yes, 4-1/4 ohms per bank, 3.2A @ 13.8v, should work. . .
> BobR.
> Shannen Durphey wrote:
> > rr wrote:
> > > I wouldn't be too quick to dismiss the '747 for a port
> > > injected engine. Edelbrock sells a pfi conversion kit to
> > > convert '747 powered trucks over to port.
> > > In the tables they change the injector constant to 112, and
> > > the pump shot stuff to smaller values. The most interesting is
> > > that they leave the injector bias, min bpw, max bpw and the
> > > 'switch to async' mode pulse widths the same.
> > > The key is to find out if they are using saturated or p&h
> > > injectors. Anybody know about this? Other thing in their
> > > favor is that these trucks are not revving too high. Although
> > > they add fuel fuel right up to the end of the ve table.
> > Here's what I have:
> > > They are 17 ohms DC resistance.  There is no other part number
> > > that
> > > Edelbrock gives for them except their house number of #3598.  They are
> > > pintle-type, they flow 30 lbs./hr at 50 psi, 20 degree spray cone.
> > Looks like 4 1/4 Ohms/bank of 4, yes?  Compared to around 2 Ohms for
> > traditional tbi injectors.
> > > I'd bet they are using p&h injetors. As the pfi p&h's are
> > > twice the impedence as the tbi p&h's, you could drive
> > > four from one driver, in a parallel/series configuration.
> > > BobR.
> > > p.s. still working on an iac writeup, I'm knee-deep in school
> > > work, bit more off than I could chew. . . or is that grabbing
> > > a hot iron by the end opposite the handle <g>
> > Definitely the latter.
> > Shannen

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org