Simple fuel cut question.

[Len Sabatine]

At 12:27 AM 8/26/00 +1000, you wrote:
>Hi All,
>
>This may sound like a silly question, but I just want clarification on this.
>When changing RPM Based Fuel Cut-off Values is this correct -
>
>HI RPM FUEL CUTOFF - LOW LIMIT, is the value to re-enable the fuel once
>cut-off is active.
>  <<<      Fuel = Resume
>HI RPM FUEL CUTOFF - HIGH LIMIT, is actual value to enable cut-off.
><<<       Fuel CutOff= Max Rpm.
>FUEL CUTOFF TIME THRESHOLD, is the time fuel is cut-off in an attempt to
>reach the FUEL CUTOFF LOW LIMIT RPM again.
><< Hysteresis Val = # between On / Off switches = Prevent Hunting.
    Len


>Thanks,
>Ross Myers
>Melbourne, Australia
>E-mail : ponty at axis.jeack.com.au
>Stuff : http://www.jeack.com.au/~ponty
><><><><><><><><><><><><><><><>
>
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org