wiring diagram for 87 camaro - *no EFI* please help!!

[Bruce Plecan]

As far as I remember the fans on the CCC just use a temp sender.
Dar/Blu wire as I recall.  Same connector as the K/S.  Short it to ground
fan should run.
Yep relay involved.
Just wiring from there as I recall
Bruce


> I am having problems with a friends 87 camaro, swapped a 350 crate motor
> in, and the fan circuit won't work.  All sensors work and are hooked up,
> but I think there may be a falsi ground somewhere, and without a wiring
> diagram, I'm stuck.  I have the ecm pinouts from the archives, but they
> don't match exactly.  There is one relay on pass. fender and some more on
> drivers side firewal that are in the circuit, but I do not know how they
> are related.  I have jumped the fan at the fan termials and it works, but
> when the relay is energized   (I think), nothing happens.  I really need a
> wiring diagram, does anyone have one they can fax me?  maybe a website?
> thirdgen is down for upgrades, otherwise I'd ask them as not to bother all
> of you. I do have a chiltons manual but it doesn't have the wiring diagram
> in it.  This is a CCC car.  orginally a 305/auto.   thank you for the
help.
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org