Found my 8051
Scot Sealander
Sealand at clarityconnect.com
Wed Aug 30 10:47:38 GMT 2000
Bruce Plecan wrote:
> Is there a secret code needed, or is it just me?
> Bruce
I have Win98, and Wordpad opened it just fine.
I have attached a dot txt file, but it needs to be formatted.
He did put the text in the color of the connector...
Scot
-------------- next part --------------
Red Blue Grey Black
1 Crank Sensor (96 only) GND IAC Coil A High A/C Request
2 GND Trans Press Con Sol Low IAC Coil A Low Low Resolution Signal
3 Injector # 1 Ignition Positive Volts Right Rear O2 Low(96 only) Distributor Ref Low
4 Injector # 4 Right Rear O2 High (96 only)
5 Injector # 6 IAC Coil B Low Ignition Control
6 Injector # 7 Trans TCC PWM Sol IAC Coil B High Sensor GND
7 FP relay Serial Data Class 2(96 only) Right Front O2 Low Trans 1-2 Shift Control
8 A/C Clutch Control Right Front O2 High VSS Out
9 EGR Control MIL Control
10 Cooling Fan R2&3 EVAP Purge Sol.
11 Cooling Fan R1 Trans TCC Sol. TCS Active signal
12 EBTCM TP sensor Signal A/C Pressure sensor Trans 2-3 Shift Control
13 Tachometer Out Performance Mode Switch Signal Skip Shift Control or 3-2 downshift
14 Air Pump Relay Brake Signal Switch Distributor Ignition feed
15 Trans Mode Lamp Control Skip Shift Lamp PNP Switch +12V Battery
16 Trans Pressure Control Sol. Sensor GND
17 Left Rear O2 low(96 only)
18 GND Left Rear O2 High(96 only)
19 Injector # 2 Left Front O2 Low MAF signal
20 Injector # 5 Output/Field service Enable Left Front O2 High High Resolution Signal
21 Injector # 3 IAT sensor A/C Clutch Status
22 Injector # 8 Knock Sensor TP sensor
23 TCS Retard Control MAP sensor EVAP Vacuum Switch (96 only)
24 A/C Temp Sensor
25 Fuel Enable signal ECT sensor
26
27
28 Trans Fluid Temp Sensor Trans Range Signal A 5 Volt Reference
29 Trans Range Signal B 5 Volt Reference
30 Serial Data Trans Range C Ignition Positive Voltage
31 VSS Signal Low Bat Positive voltage
32 VSS Signal High GND
More information about the Gmecm
mailing list