Memcal for P6?

[Bruce]

Buy a spare memcal, chop the eprom off, and put a ZIF socket on.
Long term, that's what I always wind up defaulting to.
Wear out the memcal socket on the the PCB, and then your in real trouble
Bruce



----- Original Message -----
From: "Programmer" <nwester at eidnet.org>
To: <gmecm at diy-efi.org>
Sent: Tuesday, August 28, 2001 12:28 PM
Subject: Re: Memcal for P6?


> Use a couple "row headers"--they're cheap. You can then
> read directly from the memcal. Insert them in the memcal
> base (14 pins per side) and adjust to fit your EPROM reader/burner. I took
> my UV eraser apart, so I can literally insert the entire memcal into
it--for
> erasure.
>
> Lyndon.
> ----- Original Message -----
> From: "Reid Bishop" <rbish at attglobal.net>
> To: <gmecm at diy-efi.org>
> Sent: Tuesday, August 28, 2001 1:09 AM
> Subject: Memcal for P6?
>
>
> > I've poured over the FAQ and the Web, and don't have an answer for this
> > question- forgive me if this has been answered before.
> >
> > How does one remove the factory 'prom from a P6 Memcal without
destroying
> > the Memcal?  I see how I can adapt the Memcal to my programmer once I
get
> my
> > own Prom in there, but just how do I go about doing this?  I want to
> retain
> > the 'original & stock' look in case the dealer ever pokes around- I just
> > haven't figured out the best way to do this.
> >
> > Thanks!
> >
> > Reid Bishop
> > www.pervinco.com
> > Home of Pocket ALDL
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org