Emulator gone bonkers

[Jim Sloan]

I never had this problem. I often program the emulator, disconnect it, then
hook up diacom.  I leave the emulator disconnected from the laptop most of
the time.

I'm not sure how you have the adapter socketed to your memcal.....maybe an
intermittent problem there.

Jim Sloan
leroy at sunflower.com

> -----Original Message-----
> From: owner-gmecm at diy-efi.org
> [mailto:owner-gmecm at diy-efi.org]On Behalf
> Of Keith
> Sent: Thursday, November 30, 2000 1:16 PM
> To: gmecm at diy-efi.org
> Subject: Re: Emulator gone bonkers
>
>
> The emulator is cool cause you can edit the bin on the fly.
> If you know hex and the addresses it's easy.
> Keith
>
> Bruce Plecan wrote:
> >
> > I'm still stuck on testing and burning chips.
> > How ever, I've got one of Todds Switchers, where I can run
> 16 bins, and
> > switch between them.
> > I still haven't installed it yet, but it really looks like
> the way to go.
> > Takes alot less mental effort to keep track of what's going
> on, and allows
> > me to more consentrate on driving.
> > Just a sheet of paper for notes and being able to do that
> many looks to be a
> > winner.
> > Dunno for sure but a MSD 7A and solid wires would seem to
> be a real RFI
> > generator
> > Bruce
> >
> > > I had a weird experience with the EPROM Emulator that i
> bought from
> > > http://www.ldti.net/epm_emu.htm.
> > > I hooked up the Emulator to a 92 Typhoon and it was
> running fine when
> > > testing it on the street but when I tried to run it at
> the track it
> > > crapped out on me. It seemed like it lost the program, i
> resent the file
> > > to the eprom and it ran well for a couple of minutes and
> then dropped
> > > again.
> > >
> > > Is it possible that something was interfering with the
> Emulator at the
> > > track?
> > >
> > > After a crappy run down the track, I resent the bin and
> tested the truck
> > > out in the street and it was fine. I did 3 launches
> without a problem.
> > >
> > > Has anyone else ever come across this problem?
> > > Thanks.
> > > --
> > > Keith F.A.S.T.
> > > Riverview, FL
> > > '91 GMC Syclone #2173
> > > '75 Oldsmobile Hurst/Olds
> > > '92 Nissan Sentra SE-R
> > > http://www.syty.net
> > > Direct Forum link -->>>
> > > http://www.syty.net/cgi-bin/Ultimate.cgi?action=intro
> > > See my homepage at  -->>> http://home.tampabay.rr.com/keith455
> > >
> --------------------------------------------------------------
> ------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm"
> (without the quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> > >
> >
> >
> --------------------------------------------------------------
> --------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm"
> (without the quotes)
> > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
> --
> Keith Gill F.A.S.T.
> Riverview, FL
> '91 GMC Syclone #2173
> '75 Oldsmobile Hurst/Olds
> '92 Nissan Sentra SE-R
> http://www.syty.net
> Direct Forum link -->>>
> http://www.syty.net/cgi-bin/Ultimate.cgi?action=intro
> See my homepage at  -->>> http://home.tampabay.rr.com/keith455
> --------------------------------------------------------------
> --------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without
> the quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org