'730 in a '73

[Programmer]

You could just get the tone ring, extension housing , VSS sensor and you've
got your setup problem solved. Just centre the tone ring in the VSS sensor
hole.

Lyndon.
----- Original Message -----
From: <A70Duster at aol.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, December 14, 2000 5:19 PM
Subject: '730 in a '73


> I have a '730 'puter and wiring harness that I want to put into a '73
Camaro.  Here is another question.
>
> I want to utilize the stock 4-speed with the stock speedo cable.
>
> I can also imagine adding the reluctor and pickup for the VSS.  No biggie.
>
> In one of the schematics I found, it states next to the speed sensor that
4000 pulses equate to one mile.
>
> Another schematic just had a "generator" connected to some gears and
didn't specify the number of pulses per mile.
>
>
> I have the 'puter with the two black connectors and one yellow connector.
>
> Thanks
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org