Guidance:I am a beginer !!

[Swayze]

subject line search should have been MAF and SD
byE
Mike
Swayze
mswayze at truswood.com
kswayze at bellsouth.net

----- Original Message ----- 
From: "Swayze" <kswayze at bellsouth.net>
To: <gmecm at diy-efi.org>
Sent: Tuesday, February 08, 2000 5:27 PM
Subject: Re: Guidance:I am a beginer !!


> Hi,
> you will need to look in the
> archives(DIY_EFI not GMECM) under the
> subject header MAF and MAP (I believe).
> A FORD engineer goes into a lengthy
> discussion on how the different EFI
> systems work. He also references several
> SAE papers which would be good reading.
> Most of the GMECM systems are Motorola
> based microcontrollers-- you will need
> to visit the Motorola WEB site for info
> on these.The GM versions are specialized
> versions of these. Most of the available
> books describing system specifics for
> EFI are service manuals. They do not
> tend to get heavily into modifying or
> explaining the 'programming' (tuning) of
> these systems. The internet is probably
> your next best reference. One of the
> most common systems on this list is the
> TPI setup. You can find some info on
> this at
> http://www.jimsperformance.com/portinj.html
> There are some pertinent equations at
> the EFI332 site
> http://efi332.eng.ohio-state.edu/grippo/equations.html
> although I went here for my needs
> http://sura1.jlab.org/~grippo/auto.html
> and there are some spreadsheets in the
> archives which prove handy.
> 
> What are the most prevalent automobiles
> in India? Are there U-Pull-It junkyards
> close to where you live? These would
> prove to be a source of inexpensive
> components.
> 
> VAIDYA AJAY ASHOK wrote:
> > 
> > Hi all,
> >         I want to learn a Electronic Fuel Injection. I am a beginer in
> > this  field, that is why i fail to get the all the stuff in this mailing
> > list.which books or sites would you like to suggest for me to read.
> >         I don't have any sound background of microcontrollers.I am doing
> > my Master's Degree in Design Engg.( under mechanical department) at Indian
> > Institute of Technology Bombay,India.Here i am working on the "Electronic
> > fuel injection" I need more informations regarding detail for single or
> > multi port injections, What is microcontroller used ? How they worked ? if
> > you have the book about Design Electronic Fuel Injection, include Hardware
> > and Software, would you please tell me.
> >         Thanks for your attention, please email me back.
> > Keep mailing.
> > Your's
> > Ajay Vaidya.
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >                 I think ["HENCE"],I can "DO" it !!!
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >         * LOCAL ADDRESS *                          * GLOBAL ADDRESS *
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >      VAIDYA AJAY ASHOK                         C/O ASHOK B. VAIDYA.
> >      M.TECH. [DESIGN] (MECHANICAL ENGG.)       PLOT NO.13-B, 273/1,
> >      HOSTEL NO : H-1                           DR. ANTROLIKAR NAGER -1,
> >      ROOM   NO : 104                           BEHIND KINARA HOTEL,
> >      PHONE  NO :  External: 5781017            SOLAPUR :413003.
> >      IIT-BOMBAY,POWAI,Mumbai-76.               MAHARASHSTRA.
> >      POWAI,Mumbai 400076                       India.
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >                    *E-MAIL*    aavaidya at me.iitb.ernet.in
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > 
> > ----------------------------------------------------------------------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> 

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org