Crossfire injectors.

[Carl Summers]

I've got a couple of pairs of crossfire setups here and can take them apart
to see, but I would have to agree, one is probably a dampener..hth's
-Carl Summers

-----Original Message-----
From: owner-gmecm at diy-efi.org [mailto:owner-gmecm at diy-efi.org]On Behalf
Of Ken Kelly
Sent: Thursday, February 03, 2000 4:19 PM
To: gmecm at diy-efi.org
Subject: RE: Crossfire injectors.


> I may be way off base on this(happens alot), but I thought the Idea of
>accumulator had to with keeping the firing of each injector from effecting
>the other since they are in series.
>i.e. the front injector firing wouldn't affect FP to the rear when it
fired,
>especially under higher demand times.

I was under the same impression until I took it apart. There's no regulation
of any kind going on here. Just a rubber diaphragm with a hard metal piece
in the middle. On the body, there's a small metal "spider" that keeps the
metal piece from going anywhere. If you think about it; they don't have two
FPR's for the 2bbl throttle bodies, either.

Ken

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org