Need help on 87 GM Buick GN ESC pin-out...

Iestyn Guest iguest at viewlogic.com
Wed Feb 9 17:45:13 GMT 2000


Hello All -

Do you know what the pin-out assignment should be for the 87 GN ESC module?
I'm building up a new system using the Felpro SEFI8LO system - It requires a
standard GM ESC - I wasn't sure what to buy from the local GM dealer, so I
got an 87 Buick GN Module.

Now I have the module, but have no idea what pins to wire to the ECM, knock
sensor, Power and GND etc..  The only thing I do know is that the one wire
to
the ECM is kept 'high' until knock is detected, and then pulled 'low' to
ground to retard timing for the duration of the knock. - Most auto books
show just a color coded wiring harness for 4 wires.  I don't have the
harness and this ESC module has 5 pins!!

Please help if you know.

Kind regards.

Iestyn.

======================================================
Iestyn Guest                                  iguest at viewlogic.com
Corporate Applications Engineer   Hotline 800-223-8439
Viewlogic Systems, Inc.                 Web: www.viewlogic.com
293 Boston Post Road W            fax 508-460-8213
Marlborough, MA 01752
======================================================

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list