ecm bench

[Jennifer Green & Scott Peitzsch]

>I run my test bench for an 8051 (94-95 LT1)PCm in a 3.5" floppy
>expansion box, and use the built in Power supply. It works fine, and
>sits at about 11.8 volts.  I do not power the Injectors with it. They
>are the big power users. My supply is a standard PC expansion box
>rated at 12v and 2.02 Amps!

Just measured the current requirements of one of my 8051's:

Vin = 13.5VDC
Iin = 1.1A

It remained stable around 1.1A, even during the re-flash procedure.

-Scott
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org