rats! vats!

[Programmer]

Geez--You had one of those too ???!!!

LW
-----Original Message-----
From: Jeff M <tystorm at email.msn.com>
To: gmecm at diy-efi.org <gmecm at diy-efi.org>
Date: February 10, 2000 9:26 AM
Subject: Re: rats! vats!


>This sounds like a TRS80 at work ;-) make sure you crank that playback
>volume up.
>
>
>
>> Or - a microcassette recorder plugged into the aldl and playback to a
>laptop
>> later? line level input or direct to mike?
>
>
>> > Aw, use the easy solution... Use a modem. 9600 and higher are a piece
of
>> cake.
>> >
>> > At 09:23 AM 2/9/2000 -0800, you wrote:
>> > >You can run a data linkt over a radio, but it has to have beter band
>> width
>> > >than most to pass an 8 Khz signal, most vice chanels are 3.5 Khz and
it
>> must
>> > >be full duplex since you have to request each data string.
>> > >You could re-write that section of code to delete the request data
>> function
>> > >
>> > >On Tue, 08 Feb 2000 20:27:24 PST, gmecm at diy-efi.org wrote:
>> > >
>> > >>  Speaking of thinking, 8192baud is audible,(baudible?) has anybody
>ever
>> > >>  hooked a walkie talkie to an aldl so they can monitor the car from
>the
>> > >pit?
>> > >>  Two way data transfer would be a bad idea, "excuse me, but your car
>> seems
>> > >to
>> > >>  be running a little too fast. Let me fix that for ya."
>> > >>
>> > >>  How 'bout a sound card interface or maybe one of those old junky
>> modems
>> > >>  laying around. maybe pop a cassette into the car stereo and reprog.
>> your
>> > >car
>> > >>  on the fly.
>> >
>> > Thanks,
>> >         Peter Hipson (founder, NEHOG)
>> >         1995 White NA Hummer Wagon
>>
>> -------------------------------------------------------------------------
-
>> --
>> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
>> > in the body of a message (not the subject) to
>majordomo at lists.diy-efi.org
>> >
>> >
>>
>> -------------------------------------------------------------------------
-
>--
>> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>>
>
>
>
>---------------------------------------------------------------------------
-
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org