'727/'730 v-8 .bin EGR

[nacelp]

Ludis has some of this posted at his site.
They vary a bunch.
While lots of the gm wiring lines up by color don't always expect that.
Pin outs can vary by software
Grumpy

> In looking at the various pinouts for '727 and '730 applications I noticed
that the v-8 '730 app has an EGR solenoid(aujp.bin?) and was wondering in
using a '727 with aujp.bin where this 'pin' would be? the '727 I have been
reviewing have been for 3.1L (digital egr)and 2.5L (vacuum egr?). I would
like to be able to 'switch on/off ' a vacuum controlled EGR. I checked Ludis
pages but did not see EGR as one of the pinouts. Is there a significant
difference in the pinouts for a '727 v-8  vs. a '730 v-8 aside from the
obvious connector differences? off to the archives........
> byE
> Mike
> Swayze
> mswayze at truswood.com
> kswayze at bellsouth.net
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org