A little vague...ECM for forced induction

[Bruce Plecan]

The 1227749 is haced, and their is promgrammer at the syty for $x, that you
cna use for editing all the 749 tables, switches.
The 1227730 is John Gwynnes baby and seems to be a nice set up idea, and
uses full time baro.
Terry Kelly has an editor for the Turbo GPs, uses the 1227727
The 1228331 is used in the Turbo Europa's (?) Ekan's (?) and Andy Whittaker
is working on them as we speak.

Since Mr Brooks is using a Chevy engine with a Dissy the easy one to use for
him IMHO is the 749.  Close 2nd place is John setup, the 730 ecm is
generally easier to find.
Grumpy


> Ok, this is just so I don't sound completely off the wall.
>
> I have no idea where to find a hack of the Lotus calibration for the
> 331 ecm.
> Better?
> Shannen
>
> Shannen Durphey wrote:
> >
> > The 1227730 has also been used for forced induction, and I suspect it
> > has recieved a thorough hacking, but the information not readily
> > available.  The '749 is about the most accessible.  The 1228331 ZR1
> > ecm is also used for forced induction engines overseas, but the
> > software is different from the domestic stuff and I have no idea where
> > to find that info.
> >
> > Whatcha building?
> > Shannen
> >
> > C. Brooks wrote:
> > >
> > > How many different ECM's were (Can be) used for forced induction? I
know of
> > > two, the 1227749 and the 16183247. Are there any others? Which has
been
> > > hacked the most?
> > >
> > > Charles Brooks
> > > Mid-Atlantic Speed Shop
> > > http://www.massmotorsports.com
> > >
> >
> --------------------------------------------------------------------------
--
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
>
> --------------------------------------------------------------------------
--
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org