730 Memcal was... RE: MAF BLM based tuning

[Marteney, Steven J.]

Yeah, was noticing that.  Which makes me ask the following question... I'm
going to need a Memcal for a 730 for an F-body 350.  Prefer not to make my
own.  Don't need it with PROM or code, I can do all that.  I just want the
physical package with the resistor networks.  Can anyone help out?
Steve

-----Original Message-----
From: Bruce Plecan [mailto:nacelp at bright.net]
Sent: Tuesday, July 04, 2000 11:36 PM
To: gmecm at diy-efi.org
Subject: Re: MAF BLM based tuning



Gosh, the silence is deafening
Grumpy

> (This is for MAF '165 ARAP... 383 app)
> Given that the BLM cell seperators are 13,21,34 g/s, and 700,1200,2000
> RPM...
> and as an example, say cells 6 and 10 show high values (160)  and the rest
> are fine (low 130's).
> Since I have no VE tables to speak of,  What would be a good first step in
> settling the bad BLM's back to normal, without affecting the rest of the
> good BLM's?
> Please respond without using the word "MAP"   ;-P
> Extra credit:  Anyone tried expanding or sliding the range that BLM's
> affect?  like 13,27,40 and 700,1600,2800?
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org