The Factory harness...is good!

Jim and Sharon Brady bradyiii at shore.intercom.net
Wed Jul 19 23:43:32 GMT 2000


Bruce,
    My point is that aftermarket harness' are crap.  We had a guy on the
Monte list screwing with a Painless harness for over 6 months.  The
gentleman that helped me with my TPI tryed to help this guy but he insisted
on working with his friends at Painless and could not get the car to pass
New Jersey inspection.  A case and point to back up first statement.  My
second point was to agree with you that the factory harness is great if for
no other reason than the "1.23984837459388748399   Bazillion dollars a year
in wiring harnesses, and R+D.  Need me to make any other points?

Jim Brady
'87 Monte SS 383 TPI 6 speed

> JIM:
> And your point is?
> Grumpy
>
>
> ----- Original Message -----
> From: "Jim and Sharon Brady" <bradyiii at shore.intercom.net>
> To: <gmecm at diy-efi.org>
> Sent: Wednesday, July 19, 2000 4:32 PM
> Subject: Re: Another Newbie Question, part II
>
>
> > Bruce,
> >     A gentleman from the Monte list essentially explained to me how to
> wire
> > the factory harness to my car.  He has performed at least twenty such
> > conversions and worked with a few aftermarket harness'.  He swears by
> > factory harness' and when he has had to use the aftermarket he has spent
> > more time repair them than if he would have just started with a factory.
> A
> > used factory harness is a lot cheaper than an aftermarket harness
anyway.
> >
> > Jim Brady
> > '87 Monte SS 383 TPI 6 speed
> >
> > >
> > > > The suggestions involve getting parts from a used parts place and
> > adapting
> > > > it to my current engine?
> > >
> > > Yes, and armed with good information, it gets easy.  Have you down
> loaded
> > > the archives, and sone much reading?.
> > >
> > >   Is this correct, I got lost in some of the
> > > > technical language.  How about "kits" from Affordable, Edlebrock,
> > Howell,
> > > > etc; any comments on these companies?  Thanks.  Charles
> > >
> > > Gm spends about 1.23984837459388748399   Bazillion dollars a year in
> > wiring
> > > harnesses, and R+D.  How much ya think these guys spend for R+D,
couple
> > > afternoons?.  For further details please feel free to read hte
archives
> > > Grumpy
> >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list