2-Bar 730/AUJP

ECMnut at aol.com ECMnut at aol.com
Thu Jul 27 04:26:22 GMT 2000


Oh man,
this sound like as close to a "4 wheel dirt bike" as you can get..
John, do you have any pics?
Thanks,
mike V
Chardon, OH 

>  yes, that's the code I routinely use. I've been very happy with the
>  setup... it runs very smooth with a reasonable amount of power... an
>  '88 305 TPI, '730 ecm, Crane Cam (I've forgotten the spec), Vortech
>  V-1 S-trim, 24 lb. injectors, FMU,.... it's doing about 12 PSI of
>  boost at 6000 RPM... best measured 0-60 of 4.6 Sec. (keep in mind that
>  this is a Jeep CJ-7, 4-wheel drive, 33" tires, 4.10s, and an NV4500
>  transmission with a granny low making for only 3 useful gears plus
>  overdrive...).
>  
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list