Up-n-running...

[Bruce Plecan]

That has to look especially neat.
Did Carl ever write you back?.
CTS in air ain't gonna

Speedvison had a show about some cigarette boats, and flashed a pic of an
engine bay with 4 BBCs with those type manifolds...
Sounds neat
Bruce



> Well, my Chevelle is now converted to EFI.  I fired it up tonight and
> let it idle for a bit.  Tomorrow's work includes some very thorough
> checking over of all lines and fittings, and making some attempt at
> setting base timing.  The only down side at this point was that idle
> seemed to be rich.  The problem may be due in part to mounting the CTS
> in a 90 degree elbow, which is a good way to trap air around it.  I
> felt the manifold and sensor, and it seems like this is what's
> happening.
>
> Now if I could only connect to the datastream...
>
> If anyone's curious, I have a couple of pictures of the manifold on
> the web.
> http://eol.grolen.com/shannen/pics/Mpfi3.jpg
> http://eol.grolen.com/shannen/pics/Mpfi4.jpg
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org