TPI/SFI article

[Dan Plaskett]

It's there.  It's just in all CAPS right above the others.

Dan

----- Original Message -----
From: "Kevin Crain" <kevin at warpten.com>
To: <gmecm at diy-efi.org>
Sent: Saturday, July 29, 2000 5:21 PM
Subject: Re: TPI/SFI article


> sftpi1.jpg doesn't seem to be there, 2-4 are tho and it looks like good
stuff!
>
> -Kevin
>
> At 03:25 PM 7/29/00 -0400, you wrote:
> >I've posted an article by Jeff Hartman in the magazine Kit Car in the
> >archives. It has a description of taking a TPI and converting it to fire
> >sequentially rather than in batch mode... The main part I found
interesting
> >is that it shows the parts needed to adapt an earlier SBC to have a crank
> >sensor and #1 position sensing... Gotta be useful for someone?
> >Anyway, the 4 pages are named sftpi1-4.jpg and are at
> >ftp.diy-efi.org/incoming
> >Hope this can help someone
> >Tom
> >
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org