Engine light on getting code 12
Keith
kgil1 at tampabay.rr.com
Mon Jul 31 00:53:08 GMT 2000
Sorry meant for that to be private.
:(
Keith wrote:
>
> check the Sy supliment and follow the engine light stays on part.
> I'll let ya know.. thanks.
>
> Jim Sloan wrote:
> >
> > Off the top o my head...code 12 means normal operation.
> >
> > Jim Sloan
> > leroy at sunflower.com
> > Syclone VIN# 1206
> > http://www.sunflower.com/~leroy
> > Lawrence, Kansas
> >
> > > -----Original Message-----
> > > From: owner-gmecm at diy-efi.org
> > > [mailto:owner-gmecm at diy-efi.org]On Behalf
> > > Of Keith
> > > Sent: Sunday, July 30, 2000 5:31 PM
> > > To: GM ECM mailing list
> > > Subject: Engine light on getting code 12
> > >
> > >
> > > This is on a 91 Syclone ECM 1227749
> > > I just replaced the engine in my truck and now when I turn the key to
> > > the "on" position the check engine light comes on. I short
> > > out the A &
> > > B
> > > on the ALDL and get a code 12. I've checked the "M" on the ALDL and it
> > > is not shorted and has 4.8V going to it. I tried a good
> > > memcal and new
> > > ECM and i still get the same code 12.
> > > Does anyone have any suggestions on what to do now?
> > > Is there a wire that i could have disturbed while replacing
> > > the engine?
> > > Thanks.
> > >
> > > --
> > > Keith Gill F.A.S.T.
> > > Riverview, FL
> > > '91 GMC Syclone #2173
> > > '75 Oldsmobile Hurst/Olds
> > > '92 Nissan Sentra SE-R
> > > http://www.syty.net
> > > Direct Forum link -->>>
> > > http://www.syty.net/cgi-bin/fast-cgi/Ultimate.cgi?action=intro
> > > http://www.geocities.com/keith455
> > > http://home.tampabay.rr.com/keith455
> > > --------------------------------------------------------------
> > > --------------
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without
> > > the quotes)
> > > in the body of a message (not the subject) to
> > > majordomo at lists.diy-efi.org
> > >
> > ----------------------------------------------------------------------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
> --
> Keith Gill F.A.S.T.
> Riverview, FL
> '91 GMC Syclone #2173
> '75 Oldsmobile Hurst/Olds
> '92 Nissan Sentra SE-R
> http://www.syty.net
> Direct Forum link -->>>
> http://www.syty.net/cgi-bin/fast-cgi/Ultimate.cgi?action=intro
> http://www.geocities.com/keith455
> http://home.tampabay.rr.com/keith455
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
--
Keith Gill F.A.S.T.
Riverview, FL
'91 GMC Syclone #2173
'75 Oldsmobile Hurst/Olds
'92 Nissan Sentra SE-R
http://www.syty.net
Direct Forum link -->>>
http://www.syty.net/cgi-bin/fast-cgi/Ultimate.cgi?action=intro
http://www.geocities.com/keith455
http://home.tampabay.rr.com/keith455
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
More information about the Gmecm
mailing list