UPDATE, Swapped to carb to rule out ignition.. and pseudo-int ro..

[Marteney, Steven J.]

My 89 350 TPI may not have much "pull" past 4500 rpm but it WILL rev to 6000
(but not much past) easily with the long-tube runners.  I've pulled shifts
there.  I wouldn't rule out the TPI entirely, IMHO.
Steve

-----Original Message-----
From: olbap [mailto:olbap at mail.mia.bellsouth.net]
Sent: Wednesday, May 31, 2000 7:17 PM
To: gmecm at diy-efi.org
Subject: Re: UPDATE, Swapped to carb to rule out ignition.. and
pseudo-intro..



 Interesting, the only thing is that im using a very short runner intake and
despite even a very small throttle body it should pull strongly up to
ATLEAST 5500 yet it does not with the tbi.. the only theory I have i just
posted to the list.  

I also have a complete TPI setup from an 87 LB9, but because the motor was
built with high rpm in mind( heads and cam), I dont plan on using it.

Pablo
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org