Injector Duty Cycle

[Dave Zug]

Using a DMM and taking a DCV reading and reverse calculating based on RMS?
you'll have to know the upper and lower voltages, AND hold the injectors to
a steady state to even be close, OR have the ability to record the DCV. I
guess you "can".

oh well, my 0.02

If you use a multimeter that is a scopemeter you can ;-)

----- Original Message -----
From: trax <trax at frederickmd.com>
To: Gmecm at Diy-Efi. Org <gmecm at diy-efi.org>
Sent: Thursday, June 01, 2000 10:59 AM
Subject: Injector Duty Cycle


> I've heard that you can use a MultiMeter to measure the Injector Duty
Cycle.
> Can someone explain how to do this ... i.e. what settings on the
MultiMeter
> and where to stick the probes.
>
> Tim
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org