Two barrel TBI must have a flaw, I give up.

[Mark M. Pikas]

> -----Original Message-----
> From: Gregory A. Parmer [mailto:gparmer at acesag.auburn.edu]

> > BTW when you say hardwood, you mean as in a specific type 
> of wood (im not a
> > wood worker type guy) right? I know whatever it is I have 
> to cover it in
> > that R/C plane dope
> 
> Lowes/Home Depot: Oak = hardwood, Pine = soft. Depending on the app no
> dope may be necessary. Figure it's gonna have gas splashed on 
> the inside
> and bits of oil on the outside.

What kind of "R/C plane dope?"  Are you talking about soaking it in Hot
Stuff or something?  Is there anything else that works well?  If you're
talking about that stuff, I can see two problems: one, that stuff is
expensive, you might come out ahead buying a chunk of aluminum at the scrap
yard and marking it out and paying a machine shop to cut the holes in it,
and second, the octane enhancing additives that are added to gas should
dissolve that eventually...

hum, I built an RC plane when I was a kid, and I remember covering the
firewall and engine mounts with something that made it hard as hell and
impenetrable to the methanol/nitro methane/oil combination that that thing
burned...

Mark (would love to make my own spacers and have plenty of woodworking
tools)
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org