BIG WinBin vs TunerCat discrepencies

[Squash]

When in doubt, check that hac's.  They contain all the equations/stuff for figuring these problems
out.  The VE table in a aujp/anht goes to 5600 rpm, but promedit seems to read the bytes right
before a given table address, which ususally gives the tables dimensions, etc.  In the case of the
hi VE table, promedit thinks that table should only have 9 lines (79a?):

FCB 9 ; Number of BP'S per RPM

Promedit reads this 9 as the number of rows, but it should be 11.

Squash

> But, there are much bigger fish in these waters :-(
> 
> The VE tables (both) contain the same values ... BUT IN THE WRONG CELLS!!!!
> Has anyone seen this before?  It looks like the tables are turned sideways.
> The values in the 20kpa column for rpms 1600-4800 inside TunerCat are the
> values in WinBin for 1600rpms for 20-100kpa!!!!  What the?  Furthermore,
> TunerCat has this table populated to 5600rpms and WinBin only goes to
> 4800rpms.
> 
> This discrepency is also true with the spark tables ... but, to a much
> bigger degree.  The tables don't even contain the same values :-(
> 
> Does ANYONE know what is up with this?  FELP!
> 
> Tim
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 


=====
Trains, Trucks, and EFI at http://www.trailrunners4x4.org/users/realsquash

__________________________________________________
Do You Yahoo!?
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org