BIG WinBin vs TunerCat discrepencies

[Mike Rolica]

Esp the 165's.. 730 aren't so bad...
Mike Rolica
Plant A,
Magnesium Products Division
Strathroy

(519)-245-4040  Ext. 265


		-----Original Message-----
		From:	Bruce Plecan [SMTP:nacelp at bright.net]
		Sent:	Thursday, June 15, 2000 11:15 AM
		To:	gmecm at diy-efi.org
		Subject:	Re: BIG WinBin vs TunerCat discrepencies

		Generally the bins can be refered to by mask ID.
		128+256s at 0008
		512s at 4008
		This isn't an absolute, again the F to Y platforms have been
known to vary,
		with in the same mask ID.
		Grumpy

		> Aren't the .ecus for specific bins or groups of bins?? (
anyone got a 730
		4cyl
		> bin hacked, or a .ecu for one?)
		>
		> Previously, you (Programmer) wrote:
		> { The *.ecu files are the problem...you'll have to rework
your
		> { own to correct them. I don't think anyone has posted a
correct
		> { 730 ECU for WinBin as yet--close, but not correct. The
info for the
		ECU's
		> { have been taken from dissembled info--which must be
incorrect ??
		> { Lyndon.
		> { -----Original Message-----
		> { From: trax <trax at frederickmd.com>
		> { To: Gmecm at Diy-Efi. Org <gmecm at diy-efi.org>
		> { Cc: Nick Dedio <nickd_92 at hotmail.com>
		> { Date: June 14, 2000 3:28 PM
		> { Subject: BIG WinBin vs TunerCat discrepencies
		>

		>

		> { >FELP!  FELP!
		> { >
		> { >I thought that these discrepencies were just limited to
what I
		initially
		> { >mentioned; namely, ...
		> { >
		> { >Coolant fan temps
		> { >Injector flow rate
		> { >Feul cutoff and return (RPM)
		> { >Cold, Warm, and Hot closed loop timers
		> { >
		> { >But, there are much bigger fish in these waters :-(
		> { >
		> { >The VE tables (both) contain the same values ... BUT IN
THE WRONG
		CELLS!!!!
		> { >Has anyone seen this before?  It looks like the tables
are turned
		sideways.
		> { >The values in the 20kpa column for rpms 1600-4800
inside TunerCat are
		the
		> { >values in WinBin for 1600rpms for 20-100kpa!!!!  What
the?
		Furthermore,
		> { >TunerCat has this table populated to 5600rpms and
WinBin only goes to
		> { >4800rpms.
		> { >
		> { >This discrepency is also true with the spark tables ...
but, to a much
		> { >bigger degree.  The tables don't even contain the same
values :-(
		> { >
		> { >Does ANYONE know what is up with this?  FELP!
		> { >
		> { >Tim
		> { >
		>

	
>---------------------------------------------------------------------------
		> { -
		> { >To unsubscribe from gmecm, send "unsubscribe gmecm"
(without the
		quotes)
		> { >in the body of a message (not the subject) to
		majordomo at lists.diy-efi.org
		> { >
		>

		>
	
---------------------------------------------------------------------------
		-
		> { To unsubscribe from gmecm, send "unsubscribe gmecm"
(without the quotes)
		> { in the body of a message (not the subject) to
		majordomo at lists.diy-efi.org
		>

		>
		> --
		> Pat Ford                           email: pford at qnx.com
		> QNX Software Systems, Ltd.           WWW:
http://www.qnx.com
		> (613) 591-0931      (voice)         mail: 175 Terence
Matthews
		> (613) 591-3579      (fax)                 Kanata, Ontario,
Canada K2M 1W8
		>
		>
--------------------------------------------------------------------------
		--
		> To unsubscribe from gmecm, send "unsubscribe gmecm"
(without the quotes)
		> in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
		>
		>

	
----------------------------------------------------------------------------
		To unsubscribe from gmecm, send "unsubscribe gmecm" (without
the quotes)
		in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 5117 bytes
Desc: not available
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20000615/e8ec56f7/attachment.bin>