Turbo bin uploaded to incoming

[Ludis Langens]

Richard Wakeling wrote:
> 
> Confirmed that it will do 8192 but cannot find ALDL bytes for TPS and
> Map .
> Could it be possible that the pin outs (wiring to TPS and MAP) may be
> different to
>  the 165.

I doubt that they are different.  These inputs all have unique input
circuits.  The same sensor would have to go to the same pin.  Something
I noticed about the ALDL tables:  Only the high byte of the scan ID is
transmitted.  So the other ALDL bytes might be all moved around.

> What does I-Mark mean?

What does Commodore VN mean?  :-)  It is just a model name.

> Also found that ESC is enabled which makes sense as a code 43 was set
> with ECM
> without ESC Module running on bench.

Makes sense because the MEMCAL included the knock filter circuit.

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org