4L60E Trans controller

[Scott Parkhurst]

Yes, you can, but it's no fun at 100mph....

> -----Original Message-----
> From:	alexpeper [SMTP:alexpeper at email.msn.com]
> Sent:	Friday, March 10, 2000 9:02 AM
> To:	gmecm at diy-efi.org
> Subject:	RE: 4L60E  Trans controller
> 
> Seems you can also shift gears open and close solenoids on some
> transmissions with scan tool.
> Alex
> ----- Original Message -----
> From: Scott Parkhurst <ScottP at mcmullenargus.com>
> To: <gmecm at diy-efi.org>
> Sent: Friday, March 10, 2000 11:23 AM
> Subject: RE: 4L60E Trans controller
> 
> 
> > The instructions for the T-Com specifically instruct you to splice into
> the
> > VSS wires for the new controller.
> >
> > > -----Original Message-----
> > > From: Shannen Durphey [SMTP:shannen at grolen.com]
> > > Sent: Thursday, March 09, 2000 4:18 PM
> > > To: gmecm at diy-efi.org
> > > Subject: Re: 4L60E  Trans controller
> > >
> > > Scott Parkhurst wrote:
> > >  Using the
> > > > T-Com in a  pickup truck won't cause any dash light issues, since
> the
> > > truck
> > > > uses separate ECM/TCM computers.
> > > This is not completely true.  The ECM still needs a VSS signal, and
> > > most need the park/neutral input.  Only exception is a 4X4, where the
> > > VSS is in the transfer case.
> > > Shannen
> > > >
> > > > Scott Parkhurst
> > > > Technical Editor
> > > > Popular Hot Rodding Magazine
> > > >
> > > > > -----Original Message-----
> > > > > From: gene l. clifford [SMTP:genelc at idworld.net]
> > > > > Sent: Thursday, March 09, 2000 9:25 AM
> > > > > To:   gmecm at diy-efi.org
> > > > > Subject:      4L60E  Trans controller
> > > > >
> > > > > Has any one been able to get a Price on GM part# 12497316
> > > > > This is a stand alone Trans controller for a 4L60E automatic
> > > > > any other info on above part would be welcome?
> > > > >                                                 GLC
> > > > > PS part is listed on pg. # 170 of yr. 2000 GM performance Cat.
> > > > >
> 
> 
> 
> --------------------------------------------------------------------------
> --
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org